Image Gallery
Contractor Tip: move less dirt...
We just finished up a Demo Day Expo where contractors could Demo all the new ASV equipment, and see our KIT in action.
We wanted to show contractors that if you trench the outside and leave a pile of dirt in the middle, you save time and energy.
1) Trench the hole 15 ft (for a 14ft trampoline)***notice this picture had a 16 ft diameter so people could walk around the kit to see it in the dirt...you don't need to dig the trench this big***
2) leave a pile of dirt in the center
3) place Trampoline ring/secured TDU kit in the hole.
4) use your Mini X to move the dirt to the Back Fill line on the TDU kit
5) Dig down the center of the hole to 3 feet, leaving you with a bowl shaped hole as your finished product.
*** The back fill is key to a flawless install... Backfill inside first, then outside last.
Sprinkler World Expo February 20th
Sprinkler World put on yet again another GREAT Event! Good Steaks, Good Products, Good Fun. We were excited about the turnout to our installation course, and the feedback from you all.
Don't miss our DEMO DAY March 27th where you can put a few in the dirt with new equipment provided by Builders Rent-all.
Don't let this happen to you!
Parents trying to prevent children falling off of a trampoline are purchasing "safety net" kits- Safety Nets or WIND SAILS??!!
- Our Kit ELIMINATES the possibility of the wind putting your Trampoline in your neighbors Stucco!!
2008 UNLA Expo
If you missed us at this years UNLA expo- watch for our installation class at Sprinkler Worlds upcoming event.
Installation 1
Set up trampoline ring away from hole, and place TDU kit around trampoline, interlocking each panel.